Vision40 40mm HD Built & Tuned Drone - 2S

Price: 399$
Model:

Get Quote

+86-13959965075

Micro-HD interface map

Connect the Vision40 O4, control and 2S branches to the inspected build

The Vision40 source describes a micro whoop, while the source names a 75 mm frame using 40 mm propellers. It also lists DJI O4, a GOKU F405 HD 1-2S 12 A AIO, selectable receivers and a 2S 450mAh BT3.0 battery. Those interfaces need a single bill of materials. The two-to-three-minute entry and built-and-tuned wording require a dated unit check.

Vision40 interface states

Branch	Connection evidence	Acceptance limit
Frame and propulsion	75 mm frame, 40 mm props and 1002-14000KV motors	Confirm the assembled geometry
Digital video	DJI O4 unit, camera, firmware and mode	HD and delay need output evidence
Flight electronics	F405 HD 1-2S 12 A AIO revision	Do not substitute another board
Control and power	Selected receiver plus 2S 450mAh BT3.0 pack	Duration follows the installed state

Read the O4 and AIO labels on the delivered whoop.
Choose ELRS, Ghost or Crossfire on the order.
Verify the 2S connector and battery specification.
Save the configuration and duration method with the unit date.

Vision40 overview for O4 and compact-frame identification — The Vision40 overview helps distinguish the 75 mm frame, 40 mm propellers and installed O4 context.

Vision40 source angle for receiver and 2S interface inspection — This additional Vision40 angle supports a connection check for the AIO, receiver branch and selected 2S power setup.

Interface questions

Confirm the Vision40 connections

Check the O4 unit, AIO, receiver branch and 2S battery on the assembled model before final acceptance and setup on initial delivery.

See compact digital FPV models

Interface sheet

Vision40 interface sheet

Branch	Inspected state
Geometry	Keep the 75 mm frame and 40 mm propeller records in their proper roles.
Interfaces	Confirm O4, F405 HD AIO and one control receiver.
Power and result	Bind the 2S 450mAh BT3.0 pack to any duration observation.