| Price | On request |
|---|---|
| Model | RTK Ground Base Station |
| Product type | Portable ground RTK correction base station |
| Key hardware | 915 MHz; confirm regional version |
| Protection | IP53 |
| Rated specification | 2 cm + 1 ppm; project conditions and supported equipment must be evaluated |
| Dimensions | Listed base-station dimensions: 117 × 115 × 117 mm |
| Weight | Listed base-station mass: 680 g |
Ground-side GNSS corrections
The SKYDROID RTK Ground Base Station is ground equipment for a compatible positioning system. It provides a portable base-station option where a civil UAV project needs its own correction source. It should be compared with other correction arrangements, not with a flight controller or a camera: those devices perform different jobs on the aircraft.
The manufacturer describes a portable RTK base with Bluetooth and a 915 MHz radio mode. These are connection choices within a larger positioning system. The aircraft still needs the appropriate receiving equipment and a supported integration path. Include the flight controller, navigation receiver and ground controller in the equipment list when asking FD to quote the base station.
For work that already uses network corrections, explain whether this base is intended as the primary correction source or an alternative for a site without that network service. A base-station purchase alone does not establish compatibility with a particular receiver or provide a guaranteed positioning result at every work site.
| Selection point | What the manual identifies |
|---|---|
| Physical package | 117 × 115 × 117 mm listed dimensions; magnetic mounting feature |
| Power for field work | 12,000 mAh battery, Type-C charging and PD3.0 protocol |
| Communication | 915 MHz radio and Bluetooth functions; confirm the version and receiving equipment |
| Outdoor specification | IP53 and a listed operating range of −10 to +55 °C |
The manual states an RTK positioning specification of 2 cm + 1 ppm. That formula is a manufacturer rating for the positioning arrangement, not a promise that every aircraft survey point will achieve the same result. The receiver combination, correction status and actual working conditions remain part of project evaluation.
The listed full-charge endurance is 50 hours. Use that figure to discuss the planned work period and charging arrangement, then request confirmation for the supplied version and expected conditions. Battery capacity and a published endurance figure answer different selection questions.
No. This page describes the ground base. Identify the drone's separate receiving and navigation hardware when requesting a compatible system.
The manual describes Bluetooth and 915 MHz modes separately. Specify the controller and correction route you intend to use so the actual connection arrangement can be checked.
Send the aircraft and receiver models, existing ground equipment, project location, work duration and required support accessories. Ask for the radio version, charging equipment and supplied configuration to be named in the quotation.
| Product type | Portable ground RTK correction base station |
|---|---|
| Manufacturer positioning specification | 2 cm + 1 ppm; project conditions and supported equipment must be evaluated |
| Battery capacity | 12,000 mAh |
| Radio frequency | 915 MHz; confirm regional version |
| Bluetooth | Supported; separate mode described in manual |
| Charging protocol | PD3.0 |
| Charging connection | Type-C |
| Listed base-station mass | 680 g |
| Listed base-station dimensions | 117 × 115 × 117 mm |
| Published full-charge endurance | 50 h; supplied configuration and conditions to be confirmed |
| Ingress rating | IP53 |
| Operating temperature | −10 to +55 °C |
| Mounting feature | Magnetic attachment; support-pole arrangement shown |
Select SKYDROID S3-A custom APM avionics by aircraft type, GPS-A pairing, controller interfaces and the power and mounting needs of your UAV project....
Compare the SKYDROID S3 drone flight controller by H7 hardware, PWM and CAN connections, enclosure size and the navigation package for your multirotor....
Tel: +86-13959965075
Email: info@fpvdroneskit.com
MP/WhatsApp: +86-13959965075
Manufacturer Address:Quanzhou Valley Nanan Science and Technology Innovation Center, No. 89 Shijing Avenue, Shijing Town, Nanan City, Fujian Province
