SKYDROID GR02 Dual-Band Receiver for Coordinated UAV Ground Control

Price	On request
Model	GR02
Product type	Dual-band relay receiver for compatible G-series links
Key hardware	2.4G / 5.8G
Rated specification	Uplink 200 kbps; downlink 15 Mbps
Dimensions	Manual-listed overall dimensions: 248 × 140 × 20 mm; component scope not further specified
Weight	Manual-listed mass: 191 g
Integration	SKYDROID G-series products only in the manual

Get Quote

+86-13959965075

G-series system selection

Specify the receiver for a shared ground-control arrangement

SKYDROID GR02 is a dual-band relay receiver for compatible G-series control equipment. Its selection question is not simply which camera socket it has. A project also needs to identify the ground units, their video and data requirements, and how control authority is intended to be managed within the supported system.

SKYDROID GR02 manufacturer product image — Original manufacturer product image of the GR02. Supplied accessories are defined by the quotation.

A common picture

The manufacturer describes master and secondary units receiving video and data at the same time. For a civil inspection team, that is relevant when different operators need access to the same project information. Confirm the exact controller combination and software rather than assuming that any two handheld devices can participate.

A defined control role

The GR02 documentation also describes control switching between the supported units. The quotation should identify the intended arrangement and supplied versions. A receiver specification is not, by itself, approval for a particular aircraft operation or a guarantee of uninterrupted communication.

Keep compatibility ahead of connector count

The manual explicitly limits GR02 to SKYDROID G-series products. A connector that physically fits another controller does not establish radio or software compatibility. List both the existing ground hardware and the aircraft-side equipment before comparing GR02 with a conventional single-controller receiver.

For the imaging part of a project, name the camera, its output connection and the application expected to display the picture. Ethernet is a physical interface; successful integration also depends on the supported stream and system configuration. Ask for that combination to be checked with the supplied hardware revision.

GR02 hardware points to compare
Radio family	2.4G / 5.8G dual-band specification
Video/network connections	Two LAN ports
Aircraft control connections	One SBUS output and three PWM interfaces
Telemetry	One data-transmission port; listed serial rates of 57600, 115200 and 921600
Listed physical figures	248 × 140 × 20 mm; 191 g

SKYDROID GR02 official English product overview — Official GR02 overview showing receiver, antenna rods and connection leads.

Compare the normal data profile with the actual requirement

The specification lists a factory-default uplink of 200 kbps and a 15 Mbps downlink. It also describes additional transfer modes with different conditions. Keep a live operational data requirement separate from a bulk-file transfer requirement; a maximum value associated with another mode should not be presented as the default performance of the complete link.

Physical planning matters too. Compare the manufacturer's overall dimensions with the intended installation, including antenna and cable space. Request the exact input-voltage specification for the supplied revision and matching harness.

GR02 enquiry checklist

Can it be ordered for a third-party transmitter?

The documented pairing is the SKYDROID G-series family. Provide the specific equipment names so an unsupported mix is not mistaken for a complete package.

Does the product photograph define everything supplied?

It shows the manufacturer's GR02 hardware and accessories. Confirm the receiver, antennas, leads and any ground units as separate quotation items.

Which project details help FD select it?

Describe the civil UAV application, participating ground devices, camera connection and telemetry needs. Include the destination market, installation space and required accessory quantities.

SKYDROID GR02 specifications

Product type	Dual-band relay receiver for compatible G-series links
Controller compatibility	SKYDROID G-series products only in the manual
Radio bands	2.4G / 5.8G
LAN ports	2
Data-transmission ports	1
SBUS outputs	1
PWM interfaces	3
Listed serial rates	57600 / 115200 / 921600
Factory-default rates	Uplink 200 kbps; downlink 15 Mbps
Manual-listed overall dimensions	248 × 140 × 20 mm; component scope not further specified
Manual-listed mass	191 g
Working temperature	−10 to +60 °C
Ground-unit functionality	Supported master/secondary units receive video and data; control switching described