DIY10G207-E EO/IR Gimbal Camera with 10x Optical Zoom and IP Video

Price	On request
Model	DIY10G207-E
Visible camera	1/2.8-inch 2 MP CMOS; nominal 10× optical zoom
Thermal imager	256 × 192; fixed 7 mm lens; 12 µm; 8–14 µm
Stabilization	Three-axis gimbal; gyroscope electronic stabilization listed
Video output	RTSP network IP; 1080p30 mode
Storage	Local TF photos and video
Power input	12–26.2 V DC; Dynamic 6.5 W
Thermal lens	7 mm
Control interfaces	IP / UART / S.Bus

Get Quote

+86-13959965075

Optical detail and thermal context for inspection flights

DIY10G207-E combines a three-axis payload with two inspection views: 10× optical zoom for visible detail and a 256 × 192 detector for thermal imaging. Civil UAV teams can use the visible channel to examine a particular part of the scene while keeping a thermal view available for the same project.

The visible lens lets an operator move from an overview to a closer view of roof fittings, structural joints or equipment housings. The 7 mm thermal camera adds heat-pattern observation, while RTSP network video and TF-card storage support viewing during the flight and reviewing the saved material afterwards.

Start with the detail you need to see

The useful selection question is the size of the feature in the image at the planned working distance. This model's 10× optical zoom changes the visible camera's focal length; its 256 × 192 infrared detector has its own fixed 7 mm lens. Choose the visible zoom around the inspection detail, then evaluate the thermal view around the area you need to cover.

DIY10G207-E product image — DIY10G207-E camera and gimbal assembly.

A straightforward viewing and recording setup

The detailed product table lists RTSP IP video with a 1080p30 mode and local TF photos and video. IP, UART and S.Bus provide control options for the camera and gimbal; PWM is an optional control configuration. A receiving system that supports the required network video format gives the operator a practical way to view the image and manage camera functions.

Item	DIY10G207-E configuration
Visible sensor	1/2.8-inch, 2 MP wide-dynamic CMOS
Visible optics	10× optical zoom
Thermal imager	256 × 192; 7 mm lens; 12 µm pixels
Gimbal	Three-axis; electronic image stabilization listed
Video / storage	RTSP IP, 1080p30; local TF photos and video
Input / power	12–26.2 V DC; dynamic 6.5 W

Define the inspection view — DIY10G207-E — Define the inspection view.

Build the configuration around your inspection

1. Define the feature

Describe the fitting, joint or component that the visible camera must show. A sample scene and planned working distance help select a useful zoom setting and framing.

2. Define the thermal area

Specify whether the thermal view is for a whole roof section or individual equipment. Match the area of interest to the 7 mm lens rather than choosing by zoom number alone.

3. Define the handoff

Name the ground receiver, control interface and saved files needed by the reviewer. Plan the card, power feed and mounting space before completing the payload kit.

Get a quotation for the complete camera kit

Include your UAV model, installed payload allowance, network receiver and preferred control method. State the visible detail and thermal area to be inspected, plus any temperature-data requirement. Ask for the camera, mounting parts and cable set together so the quotation covers the equipment your installation needs.

Common selection questions

Is 10× also the thermal camera's optical zoom?

No. The 10× optical specification belongs to the visible camera. The thermal channel uses a fixed 7 mm lens and a 256 × 192 detector.

What does electronic stabilization add to the page?

The model combines a three-axis gimbal with a listed gyroscope-based electronic stabilization function. For your selection, request an original video at the zoom setting and scene detail you plan to use.

What should I include for thermal inspection enquiries?

Describe the surface and viewing area, then say whether the result you need is a thermal image or saved temperature information. That gives the camera configuration and file requirements a clear starting point.

Specification reference: manufacturer DIY10G207-E product data.

DIY10G207-E specifications

Visible Camera	1/2.8-inch 2 MP CMOS; nominal 10× optical zoom
Thermal Imager	256 × 192; fixed 7 mm lens; 12 µm; 8–14 µm
Stabilization	Three-axis gimbal; gyroscope electronic stabilization listed
Video Output	RTSP network IP; 1080p30 mode
Storage	Local TF photos and video
Control	IP / UART / S.Bus
Voltage	12–26.2 V DC
Power	Dynamic 6.5 W