Description Catalog Reviews

Connect Your Drone Camera with the Herelink V1.1 Air Unit

PriceOn request
ModelHerelink V1.1 Air Unit
Product roleAircraft air unit only
Network typeRC, HD video and telemetry
Serial connection3.3 V level
Video / data720p at 30 fps; 1080p at 30 or 60 fps
Dimensions78.5 × 30 × 15 mm
Weight98 g including antennas
InterfacesTwo Micro-HDMI ports
Get Quote


Aircraft-side video and control link

Choose the part that travels with the drone

The Herelink V1.1 air unit is the onboard component used with a separate Herelink ground controller. It brings the UAV camera connection and aircraft interfaces into the system. Choose this product when the ground handset is already available or when you are assembling the aircraft-side equipment separately.

Match each interface to its job

Camera pictureTwo Micro-HDMI input ports for the camera video connection
Aircraft dataUART interface with a documented 3.3 V signal level
RC connectionTwo S.Bus outputs listed in the official overview
V1.1 network portEthernet, a relevant difference from the earlier air unit
Service connectionMicro-USB interface for the documented service workflow

These are different interface roles. A camera with an incompatible output does not become suitable simply because the autopilot uses the right control connection. Include both the camera and flight-controller models when requesting the aircraft package.

Begin with the camera output

The documented input formats are 720p/30 fps and 1080p at either 30 or 60 fps. Compare these with the camera's actual output setting and connector. A camera's sensor resolution alone is not enough to select the video connection.

Then check the installed version

The V1.1 air unit has an Ethernet interface and its own specified dimensions and weight. Keep those details separate from V1.0 listings when adding a unit to an existing drone fleet or replacing onboard hardware.

A compact enclosure still needs installation space

The aluminum alloy body measures 78.5 × 30 × 15 mm. CubePilot lists a V1.1 mass of 98 g including antennas. Those figures help screen the unit against an aircraft equipment bay, but they are not a complete installed payload budget. Mounting parts, antenna placement, cable bends and the camera connection also occupy space.

Request a quotation that names the air unit, antennas, mounting plate and required cables individually. If the existing ground equipment is not a Herelink controller, identify it before selecting the onboard hardware; this page does not claim interchangeability with unrelated video radios.

Does the air unit record onto its SD card?

The documentation describes its SD slot as reserved for future use. No onboard recording capability is promised here.

Is the ground controller included?

No. This is the air-unit product role. Choose the complete kit when you also need the ground handset.

Specify the aircraft-side package

Send the camera model and video output, autopilot model, available mounting space and existing Herelink controller version. Include any cables or antennas you already own so the quotation covers the parts your UAV actually needs.

Herelink V1.1 Air Unit specifications

Product roleAircraft-side Herelink unit; ground controller separate
HousingAluminum alloy
V1.1 weight98 g including antennas
Dimensions78.5 × 30 × 15 mm
Camera inputsTwo Micro-HDMI ports
Video formats720p at 30 fps; 1080p at 30 or 60 fps
V1.1 interfaceEthernet
UART3.3 V level
RC outputsTwo S.Bus outputs
SD slot statusFor future use; no active recording claim

Related Resource


Customer Reviews

   

Score
 Remove

Review Title

Review Text

Need Help?
Please leave your contact information to get our latest catalog
Get In Touch Now >
FD FPV Drones

Tel: +86-15059599996

Email: info@fpvdroneskit.com

MP/WhatsApp: +86-15059599996

Manufacturer Address:Quanzhou Valley Nanan Science and Technology Innovation Center, No. 89 Shijing Avenue, Shijing Town, Nanan City, Fujian Province

NEW KEYWORD

About Us

Products

Information