Description Catalog Reviews

pMDDL2460 OEM UAV Radio Module with Gigabit Ethernet and 2×4 MIMO

PriceOn request
ModelpMDDL2460 OEM
Product roleOEM IP data radio
Network typePoint-to-point, point-to-multipoint and mesh
Form factorOEM radio module
Serial connectionSerial interface
InterfacesGigabit Ethernet; USB; serial
Get Quote


OEM integration · MHK187100

A Gigabit Ethernet interface for your UAV host design

The pMDDL2460 OEM is a UAV radio module with Gigabit Ethernet, serial and USB interfaces. It is a candidate for drone builders integrating an onboard computer, network video source and separate ground application. Select this model as part of the aircraft electronics design, with the carrier and supporting hardware defined alongside the module.

Gigabit Ethernet

The host interface is documented as Gigabit Ethernet. This describes the wired connection to the radio; it is not a promise that the wireless link will deliver the same rate under every project condition.

Serial and USB

These additional interfaces give the host design other connection options. Identify the devices and software involved before choosing the carrier or exposed cable connections.

2 × 4 MIMO architecture

The manufacturer specifies two transmit and four receive antenna paths. The complete antenna assembly and mechanical arrangement must be included when considering the installed system.

Make the traffic requirement concrete

A UAV inspection payload may supply a live preview, telemetry and files for later review. Describe these separately. The image source or onboard computer produces the network traffic, while the ground software determines what the operator can display or save. The radio module is the data-link component within that larger workflow.

For a mapping project, distinguish live operational information from original imagery stored onboard. The fact that a camera captures high-resolution files does not mean that every file must be transferred during the flight. This distinction helps create a realistic equipment requirement without selecting a radio solely by the camera's resolution.

The OEM module and its surrounding hardware

Selection itemWhat belongs in the proposal
Exact radiopMDDL2460 OEM, MHK187100, in the required quantity.
Host integrationA suitable carrier or host design, power arrangement and required data connections.
Mechanical assemblyMounting support, mating connectors, cable clearance and the installation drawing.
Complete communications systemCounterpart equipment, antennas and operator hardware, itemized where needed.

Compare the exact model rather than the family name

The pMDDL2460 is a separate model from pMDDL2450, and OEM is a different format from the 2460-SWP and 2460-ENC products. Do not carry enclosure, connector or accessory assumptions from one version to another. This page covers the OEM module pictured above.

Point-to-point, point-to-multipoint and mesh networking are documented for pMDDL2460. Describe the number and role of the required units in your civil survey, inspection or research system so the quotation covers the complete hardware requirement.

Before ordering

Is this a complete ground controller?
No. A screen, controls and operator application are separate system components. Request them explicitly if they are part of the purchase.
What is needed for a compatible video package?
Provide the camera or encoder model, its network output, the onboard host and intended ground viewing application. A compatible video path depends on those devices as well as the radio.

pMDDL2460 OEM specifications

Hardware formatOEM radio module
Manufacturer part numberMHK187100
EthernetGigabit Ethernet
Serial interfaceAvailable
USB interfaceAvailable
Radio architecture2 × 4 MIMO; 2 transmit / 4 receive antenna architecture
Network supportPoint-to-point, point-to-multipoint and mesh
Documented rolesMaster, remote and relay

Related Resource


Customer Reviews

   

Score
 Remove

Review Title

Review Text

Need Help?
Please leave your contact information to get our latest catalog
Get In Touch Now >
FD FPV Drones

Tel: +86-15059599996

Email: info@fpvdroneskit.com

MP/WhatsApp: +86-15059599996

Manufacturer Address:Quanzhou Valley Nanan Science and Technology Innovation Center, No. 89 Shijing Avenue, Shijing Town, Nanan City, Fujian Province

NEW KEYWORD

About Us

Products

Information