How to Get Your First FPV Flight Right: A Simple Checklist

Intro: First Flights Can Be Nerve-Wracking
Your gear is ready. Batteries charged. FPV goggles on. Now what? If it’s your first FPV drone flight, there are a few things you should check to avoid disappointment — or a broken quad. At FD, we recommend this quick checklist for every beginner.

1. Inspect the Drone

• Are all props tight?

• Any loose wires or antennas?

• Frame screws tight?

• Motors spin freely?

2. Set a Safe Flight Location

• Large open field, no people

• Avoid trees, metal towers, and water

• Good GPS if flying with GPS rescue

3. Confirm Flight Modes

• Angle mode for new pilots

• Acro mode for advanced

• Check modes in Betaflight — and test before takeoff

4. Check Video Feed

• Is your FPV feed clear?

• No interference or flicker?

• Make sure VTX is not on “pit mode”

5. Monitor Voltage and RSSI

• Turn on OSD (on-screen display)

• Set low battery warning to 3.5V/cell

• Check radio signal strength

Conclusion: One Minute Prep = One Happy Flight
FPV isn’t just about adrenaline — it’s about precision. A few pre-flight checks can save your drone, your battery, and your nerves. At FD, we help beginners get off the ground safely, with gear that’s tested and tuned to fly right.