SH CineLR 7 O4 6S HD Long Range FPV Drone 10 km Low Latency System

Price: 735.99$
Model:

Get Quote

+86-13959965075

SH CineLR 7: a large-format filming build

The SH CineLR 7 is described as an H-type, seven-inch-class platform with a 334 mm wheelbase. The 6S O4 configuration lists an O4 Air Unit Pro, BLITZ F7 controller and XING2 2809 motors. Confirm that exact combination on the supplied build; the shorter O4 name in a product title does not distinguish every camera-system variant.

Its physical layout and access panels are useful points to compare when selecting a filming aircraft that will need routine inspection and replacement parts.

Camera view and service access

The frame is intended to keep propellers outside the camera view. The result still depends on the fitted camera, lens field of view and mounting position, so ask for a sample view from the configuration you are ordering.

Quick-release side panels cover the wiring area and allow access for servicing. They should not be treated as a sealed enclosure or a substitute for checking the aircraft after debris or moisture exposure.

Two revisions worth matching to the supplied unit

18 January 2025
The propeller entry changed from HQProp 7.5×3.7×3 to HQProp 7.5×3×3.
11 March 2025
Some TPU parts in the BNF version were listed as replaced by injection-molded parts. Check the revision when ordering a replacement panel or mount.

What the listed package covers

The packing list names one SH CineLR 7 6S O4 HD aircraft, one battery pad, two pairs of 7.5-inch propellers, two battery straps and a screw pack. It does not name a flight battery, charger, radio or goggles as included items.

The battery examples elsewhere in the specification are configurations to discuss, not an assurance that a particular pack is supplied. Include the required receiver and video equipment in the quotation.

Browse the iFlight aircraft selection

SH CineLR 7 listed component reference

Dimensions: 285 × 196 × 45 mm.
Drive components: XING2 2809, 1250KV motors; HQ 7.5×3×3 propellers in the revised list.
Power electronics: BLITZ E55 4-in-1 ESC, specified for 2–6S with 55A continuous and 65A burst ratings; those ratings do not constitute a complete-aircraft load test.

Weight examples: Approximately 770 ± 5 g without battery; approximately 1628 ± 5 g with the listed 21700 6S 8000 mAh pack. These are different configurations.
O4 Pro storage entry: 4 GB built in, with microSD support listed up to 512 GB; confirm the installed unit and supported card requirements.
Package-specific details: Receiver model, flight battery and supplied software configuration should appear on the order rather than being inferred from the frame size.