Price:
23.99$
Model:
SPEEDX2 2107.5 variant control
The 2107.5 record contains two winding options while the title preserves the 2450KV identity. A controlled matrix must separate winding, quantity, geometry and matching propulsion evidence before selection. The title is SPEEDX2 2107.5 2450KV Motors, yet the source specification lists both 1960KV and 2450KV options and separately suggests 6S 1050–1550mAh. The archived package list is one motor: the plural title preserves page identity but does not mean a four-motor set, so every quotation must state the ordered unit count. The record also gives a 12N14P configuration, 21 × 7.5mm stator, 5mm shaft, 26.83 × 30.85mm outer size, N52H arc magnet and 29.5g weight. Because voltage suitability can differ between windings, the delivered label and a matching test table must decide the battery and propeller combination.
| Variant item | Archived record | Purchase control |
|---|---|---|
| KV | Title 2450KV; body 1960KV and 2450KV | Label, part code and ordered winding |
| Quantity | Archived package: 1 × motor; plural page title | Explicit ordered unit count and packing list |
| Geometry | 12N14P; 21 × 7.5mm stator; 5mm shaft | Current drawing and frame/propeller clearance |
| Power pairing | 6S 1050–1550mAh suggestion | Winding-specific propeller, current, thrust and ESC table |
A 1960KV and 2450KV motor sharing the same housing can have different current, temperature and propeller limits. The quotation should name the winding and include only the performance rows produced for that exact variant.
Record label, color, shaft condition, wire length, mounting screws and rotation direction. When replacing one unit, compare it with the remaining motors and investigate vibration before assuming a mixed-age set will behave identically.
Use the title's 2450KV only if the delivered label and part code match it.
No. Add the exact propeller, current, thrust, temperature and ESC data for that winding.
Avoid mixing unless the manufacturer and controlled validation support the complete combination.
Share winding, frame, propeller and battery so the correct test row and hardware can be selected.
Separate the titled winding from the alternative retained in the source archive.
Evaluate G982-4G through receiver and modem identity, antennas, correction transport, timing, raw logs and checkpoint validation....
Avatar HD Goggles X compatibility record covering display, video modes, power, HDMI, recording storage, firmware and airborne video-system pairing....
Match the SPEEDX2 1804 3450KV motor by drawing, pusher clearance, battery, propeller, ESC and a winding-specific test row....
Review VW20 integration by resolving its 5V/12V conflict and documenting RF region, antennas, video interfaces, firmware and test conditions....
Review S7 Mini compatibility through its STM32H743 board revision, sensor set, port map, rail limits, firmware and recovery file....
Review MATEN 1.2G 5W VTX PRO through channel authorization, selectable power, antenna, mounting conflict, pinout and cooling....
Tel: +86-13959965075
Email: info@fpvdroneskit.com
MP/WhatsApp: +86-13959965075
Manufacturer Address:Quanzhou Valley Nanan Science and Technology Innovation Center, No. 89 Shijing Avenue, Shijing Town, Nanan City, Fujian Province
I’ve had a few hard landings during practice, but the frame held up well. This makes it ideal for pilots who are still pushing their limits2025-12-30
The video transmission on this FPV drone kit is very reliable. Latency is low, and the image stays clear even when flying behind obstacles or at longer distances. During fast maneuvers, the feed remains smooth without sudden dropouts, which makes flying feel much more controlled and confident. For2025-12-30
This FPV drone kit grows with your skills. You can start simple and gradually upgrade components as your flying and technical knowledge improves2025-12-30
For the price, this kit delivers excellent value. You get quality components, a solid frame, and the freedom to build it exactly how you want2025-12-30