SIYI Ethernet-to-HDMI Converter Module for Drone Camera Monitors

Price	On request
Model	Ethernet-to-HDMI Converter Module

Get Quote

+86-13959965075

RTSP VIDEO TO A MONITOR

Choose the monitor connection at the end of the video path

SIYI Ethernet-to-HDMI Converter Module is intended for a ground setup that has an Ethernet RTSP video source but needs an HDMI-connected monitor. It converts the network video into a display signal through a Micro-HDMI connector. Start with the actual camera stream and the intended screen, then check that the converter fits between them.

This is a viewing accessory. It is not a camera, wireless video link or flight-control handset. It also serves the opposite direction from an HDMI input accessory used to bring a camera's HDMI signal into an air-side transmission system.

SIYI Ethernet-to-HDMI Converter Module product view — SIYI manufacturer product view; accessories and the supplied package are specified separately.

Separate the three roles in the picture path

Component	Role in the proposed setup
Camera or video source	Provides the specified Ethernet RTSP stream.
Ethernet-to-HDMI converter	Receives that stream and produces the monitor connection.
Monitor and cable	Accept the requested video format through the chosen HDMI arrangement.

Give the supplier the source model and the desired picture on the monitor. A network connector alone is not enough to establish video compatibility, and an HDMI plug does not identify every format accepted by a display. Confirm the complete source-to-screen combination.

Ask for the recording result separately

The catalog describes local MP4 recording and lists 1080p or 720p at 30fps with a 12Mbps recording bitrate. These are recording specifications. They should not be used to promise that every input or monitor output supports a particular higher resolution.

If saved video is required, specify the desired file, storage card and review device. Ask where that recording is made and how it will be retrieved. Viewing a live picture and saving a useful file are related tasks, but they are not interchangeable proof that a complete recording workflow has been supplied.

SIYI Ethernet-to-HDMI Converter Module hardware detail and package reference — SIYI manufacturer product view; accessories and the supplied package are specified separately.

Add flight information only through the supported data path

MAVLink OSD overlay is described in the catalog. It allows supported flight information to accompany the picture when the required data is available. Specify which information must appear and identify its source; an overlay feature does not create missing telemetry or establish support for every flight controller.

The catalog also describes TF-card-based configuration for the IP, stream address and OSD options. Request the supported configuration and storage items as part of the package rather than assuming a card is included.

Specify the small parts that make the monitor usable

Include the Ethernet source, monitor model, preferred display format, Micro-HDMI cable and required recording equipment in the enquiry. Ask for the exact converter revision, power requirements and mounting provisions to be identified. Leave room for the connected cables and the enclosure's ventilation needs in the proposed installation.

If the camera is already connected through a wireless link, describe the ground endpoint where its RTSP stream becomes available. This keeps the converter's role clear without assuming it provides the wireless transport itself.

Converter selection questions

Does the converter transmit video wirelessly?

No. Its stated role is Ethernet RTSP-to-HDMI conversion. A required wireless video system is a separate component.

Is this the same as an HDMI input converter?

No. Check the conversion direction: this product receives Ethernet video and provides a monitor output.

Does a live monitor picture confirm that recording is ready?

No. Specify and check the storage card, recording format and file-review requirement separately.

SIYI Ethernet-to-HDMI Converter Module specifications

Product role	Ethernet RTSP video to HDMI display converter
Signal input	Ethernet; RTSP video stream
Signal output connector	Micro-HDMI
Catalog recording resolutions	1080p at30fps or720p at30fps
Catalog recording bitrate	12Mbps
Recording file format	MP4, as stated in catalog product description
Documented display function	MAVLink OSD overlay; supported data connection required
Documented configuration method	TF-card configuration of IP, stream URL and OSD options