| Price | On request |
|---|---|
| Model | A10T Pro |
| Visible camera | 10x optical zoom; 4.7–47mm; Full HD |
| Thermal imager | 640×512 uncooled VOx; 12µm; 19mm fixed lens |
| Stabilization | Three-axis mechanical stabilization |
| Video output | Micro HDMI / Ethernet-IP output arrangements |
| Storage | MP4 1080p30 |
| Power input | 14.8–25.2V |
| Measurement modes | Radiometric thermometry optional |
The Viewpro A10T Pro places a 10x optical visible camera and a 19mm thermal camera on a three-axis gimbal. It is a practical candidate for drone inspections where a visible close view explains the condition of an asset and infrared imagery adds a second perspective. Decide first whether the job needs thermal observation or actual temperature measurements: those are different purchasing requirements.

On a building or solar installation, the visible channel can help an operator recognize the section being examined. The thermal channel can reveal a contrasting infrared pattern in that same inspection area. A useful selection brief describes the feature, the working distance and the expected result: an overview image, a closer visible record or a measurement deliverable.
Visible optical zoom and thermal framing should be considered separately. The 10x zoom belongs to the visible camera; the infrared channel uses a fixed 19mm lens. If an inspection needs the same amount of detail from both channels, compare their fields of view and sample images at the intended distance rather than applying the EO zoom number to the thermal image.
| Camera system | A10T Pro specification | Selection relevance |
|---|---|---|
| Visible imaging | 10x optical zoom, 4.7–47mm; Full HD | Adjust visible framing for the inspection feature |
| Infrared imaging | 640×512 VOx, 12µm; 19mm lens | Compare the required thermal coverage |
| Thermal field of view | 22.9° horizontal × 18.4° vertical | Check what fits in the image at your distance |
| Gimbal | Three-axis mechanical stabilization | Provide clearance for the moving payload |
| Video arrangements | Micro HDMI or Ethernet/IP | Select the connection for the airborne video link |
| Onboard recording | MP4, 1080p30 | Define the footage needed after the flight |
| Input power | 14.8–25.2V | Match the aircraft's payload power supply |
If your aircraft transmits HDMI video, request the corresponding camera output arrangement. For a network-based system, confirm the Ethernet stream and the ground application that will display it. Include camera commands in the same discussion: the manufacturer lists PWM, S.Bus, UART and network-control methods, but the functions available to the operator depend on how the system is integrated.
Allow for the mounting assembly, cable route and isolation components when discussing the installation. Send an aircraft drawing or clear photographs of the available position. That gives a better basis for an answer than payload capacity alone, particularly when the camera must look down past landing gear or other structure.

Is the thermal lens also 10x optical zoom? No. The 10x optical figure describes the visible camera. This thermal configuration has a fixed 19mm lens.
Does every unit measure temperature? Radiometric thermometry is an optional configuration. Specify it when the deliverable requires numerical temperature data.
Does the camera replace the drone's FPV flight view? A steerable inspection payload and a forward flight camera serve different tasks. Plan which view the pilot uses and which view the inspection operator needs.
| Visible camera | 10x optical zoom; 4.7–47mm; Full HD |
|---|---|
| Thermal camera | 640×512 uncooled VOx; 12µm; 19mm fixed lens |
| Thermal field of view | 22.9° horizontal × 18.4° vertical |
| Gimbal | Three-axis mechanical stabilization |
| Video output | Micro HDMI / Ethernet-IP output arrangements |
| Onboard video | MP4 1080p30 |
| Temperature measurement | Radiometric thermometry optional |
| Power input | 14.8–25.2V |

Specify a Viewpro Q30T Pro II drone camera around your video path. Compare 30x optical zoom, HDMI/IP/SDI options, recording and mounting versions....

Explore Viewpro AT19 thermal drone imaging with a 640×512 detector, 19mm lens, three-axis gimbal and HDMI or IP video connections for civil UAVs....

Select a Viewpro Q10N drone camera with 10x optical zoom, IP video, three-axis stabilization and onboard recording for an Ethernet-based UAV system....

Select the Viewpro Z36T Cube drone camera by its 36x optical lens, Full HD video output version, three-axis gimbal and UAV mounting requirements....

Choose Viewpro A10T Pro drone imaging with 10x visible zoom, a 19mm 640×512 thermal camera, HDMI or IP output, and optional radiometric thermometry....

Choose the Viewpro Q10F drone camera with 10x optical zoom, a three-axis gimbal, HDMI video and local recording for daylight UAV inspections....