Description Catalog Reviews

YANGDA Recon Eye-X-Pro Compact UAV Gimbal Camera with 4K Streaming

PriceOn request
ModelRecon Eye-X-Pro
Visible camera1/2.8-inch CMOS; 8.29MP effective pixels
StabilizationNon-orthogonal three-axis mechanical stabilization
Video output3840×2160 at30fps maximum; RTSP H.264/H.265
StoragemicroSD up to256GB; U3/V30 minimum listed
Power input10–26.4V DC
Lens configuration5.46mm actual focal length; f/1.0
Get Quote


A compact visible-light view for multirotor drone projects

The YANGDA Recon Eye-X-Pro is a small three-axis camera gimbal built around a fixed visible-light lens. It is worth considering when a multirotor needs a steerable overview image rather than a large optical zoom payload. Its useful distinction is the combination of 4K streaming, network control and a compact camera assembly; the recording format needs a separate decision.

YANGDA Recon Eye-X-Pro compact camera and gimbal seen from its right side
Recon Eye-X-Pro visible-light payload and upper mounting plate.

Choose for the file you need, not the 4K label alone

3840×2160

The listed maximum live stream is 4K at 30fps.

2688×1608

The current specification lists this maximum onboard recording resolution at 30fps.

If a construction inspection requires a live overview but the final deliverable is a recorded clip, specify both results. YANGDA describes 4K recording as a future firmware capability, so it is not treated as an included present feature here. This distinction can prevent a small camera that suits live viewing from being selected against an unsupported recording requirement.

Recon Eye-X-Pro featurePublished specification
Visible image sensor1/2.8-inch CMOS; 8.29MP effective pixels
Lens5.46mm actual focal length; f/1.0
Field of view61.7° horizontal / 34.7° vertical
Gimbal arrangementNon-orthogonal three-axis mechanical stabilization
Video streamRTSP, H.264/H.265
Power input10–26.4V DC
Storage cardmicroSD up to 256GB; U3/V30 minimum listed

A wide scene rather than a telephoto inspection

A fixed camera lens can be a useful starting point for documenting a worksite, observing a roof area or providing context around an inspection. Decide which object must remain visible at the edge of the frame and which detail must be distinguishable near the centre. If both requirements cannot be met at the same distance, compare an optical zoom camera rather than relying entirely on digital enlargement.

For changing lighting, ask for representative sample imagery that resembles the actual job: bright sky above a dark structure, shadow beneath an overhang or a dim work area. The manufacturer describes low-light visible processing and HDR, but that does not make this camera a thermal imager. Match the type of evidence the inspection requires before comparing sensitivity claims.

Opposite angled view of YANGDA Recon Eye-X-Pro showing the camera and damping mount
A second original angle shows the gimbal arm and mounting isolation.

Make installation and control part of the choice

Send the aircraft mounting position and the clearance around the camera, including the path of its cables. A compact housing is helpful only when the moving assembly can see the required area without obstruction. Network video and serial control also need to be matched to the flight controller, video transmitter and ground application. Treat software adaptation as a defined part of integration rather than assuming a shared connector establishes full compatibility.

Buyer questions

Is the 4K live stream also a 4K recording? Not in the current published recording specification. It lists 2688×1608 at 30fps, with 4K recording described as a future firmware upgrade.

Does the camera include thermal imaging? This is a visible-light model. Select an EO/IR camera if thermal contrast is needed in the same payload.

Is it suitable for close inspection details? It depends on framing and the required detail. Share a sample subject and working distance; a fixed-lens overview and a telephoto inspection serve different purposes.

YANGDA Recon Eye-X-Pro specifications

Visible sensor1/2.8-inch CMOS; 8.29MP effective pixels
Lens5.46mm actual focal length; f/1.0
Field of view61.7° horizontal / 34.7° vertical
GimbalNon-orthogonal three-axis mechanical stabilization
Live stream3840×2160 at30fps maximum; RTSP H.264/H.265
Current onboard recording2688×1608 at30fps maximum; MP4
StoragemicroSD up to256GB; U3/V30 minimum listed
Power input10–26.4V DC

Related Resource


Customer Reviews

   

Score
 Remove

Review Title

Review Text

Need Help?
Please leave your contact information to get our latest catalog
Get In Touch Now >
FD FPV Drones

Tel: +86-13959965075

Email: info@fpvdroneskit.com

MP/WhatsApp: +86-13959965075

Manufacturer Address:Quanzhou Valley Nanan Science and Technology Innovation Center, No. 89 Shijing Avenue, Shijing Town, Nanan City, Fujian Province

NEW KEYWORD

About Us

Products

Information