Price:
1628$
Model:
RE35 controller compatibility
RE35 is a controller-interface record. Radio implementation, expansion slot, USB power, channel assignment and firmware recovery must be mapped before it is attached to an aircraft or automation system. The RE35 archive identifies an STM32H7 processor, 1024KB RAM, 480MHz main frequency, 16-bit ADC, DMA2D graphics acceleration, 3.5-inch 100-nit touchscreen, 16 channels, 15W charging, an LR1121 RF chip, dual-frequency wording, Type-C, a foldable dual-band antenna and a reserved JR slot. It does not identify the complete RF protocol, supported receiver list, connector pinouts, battery specification or software release. Compatibility therefore remains an integration task.
| Interface | Archive detail | Required integration proof |
|---|---|---|
| Radio | LR1121; dual frequency; dual 1W wording | Bands, protocol, receiver list and regional approval |
| Expansion | Reserved JR slot; 16 channels | Pinout, voltage, module dimensions and channel map |
| USB/power | Type-C data/charging; 15W | Cable, input profile, battery and charging documentation |
| Software/display | STM32H7; 3.5-inch touch; model backup | Firmware version, update/recovery and file format |
Sixteen channels describe capacity, not assigned behaviour. The delivery file should name control labels, ranges, switch positions, outputs, failsafe ownership and the receiver or external system expected at each interface.
Industrial automation may use ADC, I/O or external modules, but those connections need pinouts, voltage limits, sampling behaviour and application software. Do not infer supported sensors or actuators from the processor headline.
Provide the intended receiver, external modules and I/O devices so interface support can be checked.
Keep processor features separate from verified radio, expansion and software support.
Match the TAKER H743 controller and H80_BLS ESC through the current Bluetooth notice, unresolved 512M unit, harness, BEC, firmware and cooling evidence....
Check VS20 integration through its 12V power entry, CX660X networking boundary, connectors, firmware and an itemized delivery list....
Match the SPEEDX2 1804 3450KV motor by drawing, pusher clearance, battery, propeller, ESC and a winding-specific test row....
Avatar HD Goggles X compatibility record covering display, video modes, power, HDMI, recording storage, firmware and airborne video-system pairing....
Review VW20 integration by resolving its 5V/12V conflict and documenting RF region, antennas, video interfaces, firmware and test conditions....
Map TAKER F722 45A AIO compatibility through its five UARTs, six-pin HD port, 5V rail, firmware and propulsion evidence....
Tel: +86-13959965075
Email: info@fpvdroneskit.com
MP/WhatsApp: +86-13959965075
Manufacturer Address:Quanzhou Valley Nanan Science and Technology Innovation Center, No. 89 Shijing Avenue, Shijing Town, Nanan City, Fujian Province
The motors, ESC, and frame included in this kit are better than I expected for the price. Everything feels durable and reliable, making it a strong foundation for future upgrades.2025-12-30
This kit is very upgrade-friendly. Swapping motors, VTX, or cameras is easy, which makes it great for pilots who like to customize and improve over time2025-12-30
The video transmission on this FPV drone kit is very reliable. Latency is low, and the image stays clear even when flying behind obstacles or at longer distances. During fast maneuvers, the feed remains smooth without sudden dropouts, which makes flying feel much more controlled and confident. For2025-12-30
This FPV drone kit is perfect for pilots who want to learn how everything works. Assembly was straightforward, and the components feel well matched. It’s a great balance between hands-on building and solid flight performance.2025-12-30